Sheet Metal Intake Install Instructions

Part:                                     Qty:
Weiand Lower Intake             1
Sheet Metal Upper                 1
Gaskets                                   2
Throttle Linkage Spacer         1
5/16" Stud                              4
5/16" Nuts NF                        4
5/16" Lock Washers               4
3/8" Bolts, 5" long                 4
1/8" Street Elbow                  2
1/8" x 5/16" Hosebarb            2
1/8" Plug                                 1
1/4" Street Elbow                   1
1/4" Plug                                 1
1/4" to 1/2" Hosebarb             1

1. Install injectors with upper intake off.

2. Use the supplied gaskets to seal the upper and lower intakes.

3. A throttle linkage plate has been inclued to replace your EGR spacer. Cut studs to length to fit throttle body.

Call our office if you have questions. M-F 8 am to 5 pm CST. 210-333-1642.