Installation Instructions for the
Vortech Mondo Supercharger
Bracket Kit
Qty: Parts:
Notes:
1 Front
Mounting Plate
Attach to Supercharger
1 Cylinder
Head Stand
Mounts Plate to Head
1 Tension
Plate Attach to top of Supercharger
1 Strut
Tension Plate Attach under front two nuts
1
Compressor Outlet Tube Attached supercharger to the throttle body
1 3.5"
x 3" Silicone Turbo Hose SC to
compressor outlet tube
1 3" x
3" Silicone Turbo Hose Compressor outlet tube to throttle body
1 Tie Rod
Bar Use with above & Rod ends
2 1/2"
Rod Ends w/ nuts Use with above (1 left, 1 right). Should already be put together
2 1/2"
SAE Flat Washers Use with above
2 1/2"
x 1 1/2" Bolts Use with above to brackets
2 1/2"
Nuts Use with above and SAE Washers
3 3/8"
x 1" Hex Bolt Bolts SC to plate
2 3/8"
x 1.5" Hex Bolt Fastens tension bracket & plate
5 3/8"
Hardened Washers
Use with above bolts
1 3/8"
- 24 x 1 3/4" Set screw
Tension lock screw
3 7/16"
x 6" All thread Attachs head stand to plate
3 7/16"
Nuts Use with above
3 7/16"
Flat Washer Use with above
Please call out office @ 210-333-1642 if
you have any questions. M-F 8:00 am to 5:00 p.m. CST.
