"Making Turbocharger Technology Work"

Cartech A-B-S-R-T Brace

Installation Instructions for the Vortech A-B-S-R-T Brace

Parts:
1   Blower Bracket
1   Tie Rod Bar
1   Diamond Bracket
2   1/2" - 14-1.5 Hex Head Bolts
2   1/2" - 14 Nuts
2   3/8" - 16  1.0 Stainless Steel Socket Head Cap Screw

Instructions:
1. Mount L - shaped bracket to blower with supplied cap screws.
2. Attach hyme jointed strut rod to above L - shaped bracket with the 1/2" Bolts.
3. Loosen and remove front nut on the strut tower. Place our diamond shaped plate over the
stud and replace the nut on the strut tower. Put the 1/2" bolt through the hyme joint and the other
hole on the diamond shaped plate.

Please call out office @ 210-333-1642 if you have any questions. M-F 8:00 am to 5:00 p.m. CST.
 
 

Telephone: 210.333.1642

FAX: 210.333.1749

Postal address: 18975 Marbach Ln, Suite#812, San Antonio, TX 78266

Sales E-mail: Mike Montgomery

Send mail to pmarshall@cartech.net with questions or comments about this web site.
All web pages are the property of Cartech Systems and may not be copied without express permission.
Copyright © 1998-2005 Cartech Systems LLC, all rights reserved.
Last modified: 12/16/02